Negotiable
The date of payment from buyers deliver within days
Henan
Long-term effective
2017-11-17 00:47
384
Company Profile
Henan Qianrui Machine Equipment Co.,LtdBy certification [File Integrity]
Contact: qianrui(Mr.)
Email:
Telephone:
Phone:
Area: Henan
Address: Henan
Website: http://www.drilloscar.com/ http://qianrui.top-autopart.com/
Pneumatic Drill Rod
In order to ensure the Pneumatic Drill Rod is properly used and guarantee its normal working life, the following instructions need to be noticed:
1.Properly choose the appropriate drill rod per the testing comparison or the product recommendation of our company.
2.Please make sure that the drill rod is well fit with the bit (uniform tamper); if the taper of drill rod is less than that of the bit, the top-point will be easily broken.
3.It is recommended to use the bill rod sets for place where the depth of rock drilling hole is more than 2.0m. That means firstly open the pore with a short bill rod and then continue to punching with a long drill rod to extend the working life of drill rod (based on different depth of the rock drilling hole, two or three drill rod sets could be used)
4.Please keep in a stable condition while opening pore and accordingly reduce the pushing air volume, the bill rod is not permitted working under bending-stressed condition, otherwise, the working life of bill rod will be shortened.
5.During the process of punching and the related withdrawal operation, please try to protect the bill rod from bending-stressed to improve the working life of the drill rod.
6.Please adjust the air volume of rock drilling machine per the on-spot condition (rock condition) to guarantee the normal drilling operation.
7.For rocks that cause the bill rod stuck, please use the cross-shaped bill bit.
8.Users can not change the structure of drill rod at their option or reuse it after drill rod re-machined in case of affecting the normal working life of the drill rod.
9.Users can not change the structure of drill rod at their option or reuse it after drill rod re-machined in case of affecting the normal working life of the drill rod.
10.Diameter of the drill rod should properly match with power of the rock drilling machine, if the power is high, please choose the large-size drill rod.
Technical Parameter
No. |
Specifications (mm) |
Use |
Remarks |
||
|
Diameter |
Length |
Thread |
|
|
1 |
B19 |
500~3000 |
T16 X6- M14 |
Anchor drill pipe hole |
Single use |
2 |
B19 |
500~3000 |
T16 X6- T16 |
Anchor cable hole |
Connector link |
3 |
B19 |
500~3000 |
T18 X6- T18 |
Anchor cable hole |
Connector link |
4 |
B22 |
500~6000 |
T19 X6- M16 |
Anchor drill pipe hole |
Single use |
5 |
B22 |
500~6000 |
T19 X6- T19 |
Anchor cable hole |
Connector link |
6 |
B22 |
500~6000 |
T20 X6- T20 |
Anchor cable hole |
Connector link |
7 |
B25 |
500~6000 |
T22 X6- M18 |
Anchor drill pipe hole |
Single use |
8 |
B25 |
500~6000 |
T22 X6- T22 |
Anchor cable hole |
Connector link |
9 |
B25 |
500~6000 |
T24 X6- T24 |
Anchor cable hole |
Connector link |